Team Grout · Marble Floor Polishing & Restoration · Toronto & GTA
Toronto & GTA · Residential & Commercial

Marble Polishing Restoration.

Marble doesn't lose its shine. It loses its surface.
Dull marble is scratched marble: thousands of fine scratches and acid etch marks scattering the light instead of reflecting it. No polish or wax fixes that from the top. We sand the damage out with progressively finer diamond abrasives, then bring the stone back to the finish you want.

Two minutes: how we restore and polish marble floors, what the process includes, and how your quote is calculated.

Get a FREE Quote

    Experience the change

    Drag the line. That's the same marble.

    The difference isn't a coating. The damaged layer was sanded away and the stone refinished, which is why the reflection on the right has depth and definition instead of a haze sitting on top of scratches.

    The same marble floor after polishing and restoration
    Before After
    ⇄
    See the transformation
    50%
    No floor replacement No demo, no dust Honed or polished finish Sealed for easier care

    What we do

    Damage removed first. Shine second.

    Swipe →

    Full marble floor restoration
    Complete treatment

    Full Marble Restoration

    Multi-stage diamond honing to take out scratches, etch marks and surface staining, then polishing to the finish you choose, with the grout lines cleaned along the way.

    No floor replacement required
    Marble honing and etch mark removal
    Repair

    Etch & Scratch Removal

    Water rings, spill marks and traffic lanes are damage in the stone, not stains on it. Sanding through progressive grits is the only way to take them out.

    Where dullness actually comes from
    Marble polishing and sealing result
    Protection & finish

    Polishing & Sealing

    A polishing compound brings out the stone's own lustre, then a penetrating sealer buys you time to wipe up spills before they reach the marble.

    Choose a matte or high-gloss finish

    How it works

    Four steps, and you know where you stand at each one.

    01

    Send photos or book the free evaluation

    Fill in the form with pictures of the floor, ideally one taken with light reflecting off the surface — that's what shows the scratches and etch marks. Marble usually warrants an on-site look before we commit.

    Reply within one business day
    02

    Get a written quote

    A fixed price for the work, in writing, with the finish level agreed in advance. Nothing starts until you approve it.

    Free · no obligation
    03

    We hone, polish and seal

    We protect the surrounding area, work through the diamond grits to remove the damage, polish the stone to the agreed finish and apply the sealer — without demolition.

    Scheduled around the size of your floor
    04

    Walk through it with us

    We go over the finished work together and fix anything you point out on the spot. You get a care guide, including which cleaners will etch marble.

    Before we pack up
    Start with step one

    Why homeowners call us back

    Skip the sanding and you get shiny scratches.

    • We remove the damage firstPolishing straight over scratched stone gives you gloss with no clarity. Honing the damage out is what restores a real reflection.
    • No coatings, no waxWe work the stone itself rather than putting a film on top that yellows, scuffs and eventually has to be stripped.
    • You choose the finishSoft honed matte or a high-gloss shine, agreed before we start. The right choice depends on the room and how much traffic it sees.
    • Technicians you'd invite backFully trained, certified, and — going by our reviews — the part customers mention most.
    Book my free evaluation

    From our Google reviews

    Customer satisfaction is the whole business.

    Where we work

    Toronto and the Greater Toronto Area.

    Team Grout service area map
    TorontoMississaugaBrampton VaughanMarkhamOakville BurlingtonRichmond HillEtobicoke ScarboroughAjax & Pickering

    Before you book

    The questions we get every week.

    What are those dull patches on my marble?

    Usually etch marks. Anything acidic — a spilled drink, a bathroom cleaner, lemon juice — reacts with the stone and leaves a rough spot that scatters light. It isn't a stain, so it can't be cleaned off.

    Can't I just buy a marble polish?

    Topical polishes add gloss over whatever is already there. If the surface is scratched and etched, you end up with shiny damage. The scratches have to come out first.

    Polished or honed — which should I pick?

    Polished gives the mirror look but shows etching more readily; honed is a softer matte that hides day-to-day wear better. We'll talk it through based on the room before quoting.

    Do you have to remove my marble?

    No. The existing stone stays in place. Restoration works on the surface itself, avoiding the demolition, debris and expense of replacement.

    How long before I can walk on it?

    It depends on the finish and the sealer used. Your technician gives you the exact waiting time and care instructions before leaving.

    What does it cost?

    Pricing depends on square footage, how much damage has to be removed and the finish you choose. The evaluation and quote are free; send photos through the form for the fastest answer.

    Ask us in the form

    Free quote

    Tell us about your marble.

    It takes about a minute. Include the approximate square footage and add up to five photos, with one taken against the light so we can see the scratches and etch marks. Prefer to talk? Call 289-277-0228 or email info@teamgrout.ca.

    Ready for a spotless home? Fill out the form to restore your tile and grout!





      Know Team Grout